Pressure Pipelines

PE Water Main & Gas Main Pipe // PE80 and PE100

TPS provides PE80 and PE100 pipes for Drinking Water (potable water) / Natural Gas and LPG / Sewerage and Raw Water applications. Pipes are available in coils (up to 100mtr) and sticks (up to 15mtr) in sizes and covering a range of pressure ratings.

Diameters available: From 20mm to 1200mm

Blue PE Pipe (potable water)

1 Pressure Pipelines Page

Yellow PE Pipe (gas)

1 Pressure Pipelines Page

Black PE Pipe (waste water)

PE Electrofusion // Fittings

TPS offer an extensive selection of fittings for jointing to polyethylene pipes by either electrofusion (to WIS 4-32-14) or butt fusion. Electrofusion fittings are specifically designed for reliable, high performance pipe joining and long system life. Complete with automated fusion system, modern electrofusion fittings have proven to be most economical due to the low potential for operator error.

9 PE Electrofusion

PE Electrofusion Fittings

1 Pressure Pipelines Page-2

PE Jointing Equipment available to Purchase or Hire

Service Pipe & Fittings

To complement the installation of water mains, TPS stock a wide range of materials suitable for services. MDPE service pipes are available in sizes 20mm, 25mm, 32mm, 50mm and 63mm and can be supplied in 25mtr, 50mtr and 100 mtr coils from stock. TPS also carry a comprehensive range of mechanical jointed PE fittings in the above sizes to enable speedy, leak free connections to the water system and water meter boundary boxes.

Mechanical Fittings

www.plasson.co.uk

Mechanical Fittings

MDPE Service Pipe

MDPE Service Pipe

Ductile Iron Pipe // BS EN 545 (BLUE/BLACK), BS EN 598 (RED)

TPS provides Ductile Iron socket and spigot pipes to BS EN 545 (potable water) and BS EN 598 (sewage or dirty water)

Diameters available: From 80mm to 1800mm

BS EN 545 ductile iron pipe

BS EN 545 ductile iron pipe

BS EN 545 ductile iron pipe-1

BS EN 598 ductile iron pipe

DI Flanged & Socketed Fittings // BS EN 545 and BS EN 598

TPS offer a comprehensive range of flanged and socketed fittings, as well as standard and bespoke flanged pipework available from 80mm to 1200mm for use on potable water systems (BS EN 545) and sewerage systems (BS EN 598).

Diameters available: From 80mm to 1200mm

Flanged & Socket fittings                                Flanged Pipe to BS EN 545 and BS EN 598

Flanged & Socket fittings Flanged Pipe to BS EN 545 and BS EN 598

Flanged Pipe            to BS EN 545 and BS EN 598     to BS EN 545 and BS EN 598

Flanged Pipe to BS EN 545 and BS EN 598

PVC Water Main// PVC-a and PVC-u for drinking water

Unplasticised polyvinylchloride (PVC) is a popular choice of material for pressure pipelines and water supply installations. It is suitable for both above or below ground installations over a temperature range of +5 degrees celcius to 60 degrees celsius. TPS provides PVC pipe for drinking water (potable water) in sizes from 63mm to 630mm in 10bar, 12.5bar and 16bar pressure classes.

Diameters available: From 63mm to 630mm

PVC-u (unplasticised polyvinylchloride) pipe

PVC-u (unplasticised polyvinylchloride) pipe

MOPVC Water Main // MOPVC FOR DRINKING WATER

Molecular oriented PVC-O (MOPVC) is a high performance, cost effective and environmentally friendly product for the distribution of potable (drinking) water. MOPVC pipe is lightweight, flexible and unrivalled for impact resistance, allowing fast installation. MOPVC is available from exclusively in Ireland from TPS for sizes 90mm to 800mm in 12.5bar, 16bar, 20bar and 25bar pressure ratings.

Diameters available: From 90mm to 800mm

MOPVC (Molecular oriented PVC) pipe
www.molecor.com

MOPVC (Molecular oriented PVC) pipe

Valves // WRC Approved

A complete range of fully approved Valves are available from TPS. Our range incudes:
Gate Valves (resilient seated and metal faced) – 50mm to 1200mm, in 10bar, 16bar and 25bar pressure ratings.

Fire Hydrants (Type 1 and Type 2) – 80mm, rated to 16bar and available in a choice of screwed, bayonet and instantaneous outlets. They each come with an 80mm PN16 inlet flange.

Check / Non Return Valves (spring assisted and swing check) – 50mm to 400mm suitable for potable water, wastewater and Sewerage applications.

Butterfly Valves available as lugged or wafer pattern in sizes 50mm to 1200mm.

Knife Gate Valves suitable for handling sludge’s and fluids with suspended solids. Available with lever handle or handwheel, in sizes 50mm to 1200mm.

Flap Valves available in range of materials, including DI, CI, SS and HDPE. Commonly used for outfall applications to prevent reverse flow.

Other valves available from TPS: Air Valves / Pressure Reducing Valves / Pressure Relief Valves / Duck Bill Valves / Penstocks……….and more.

Diameters available: From 50mmto 1200mm

WRc approved gate valve

WRc approved gate valve

BS750  fire hydrants Swing check non-return valve available in 3 outlet variations

BS750 fire hydrants available in 3 outlet variations

Swing check non-return valve

Swing check non-return valve

Lever Handled Butterfly Valve

Lever Handled Butterfly Valve

Knife Gate Valve

Knife Gate Valve

CI Double Hung Flap Valve

CI Double Hung Flap Valve

Couplings and Adaptors

TPS stock a full range of universal Couplings and Adaptors covering a size range from 40mm to 1200mm to suit cast, ductile, MoPVC, steel, GRP and AC pipes.

Diameters available: From 40mm to 1200mm

Flange adaptor

Flange adaptor

Coupling

Coupling